i f(av) sinusoidal waveform v rrm 800 - 1200 v i fsm 950 a v f @ 30a, t j = 25c 1.0 v t j - 40 to 150 c characteristics values units 60 a major ratings and characteristics to-247ac (modified) description/ features the 60eps...pbf rectifier safe ir series has been optimized for very low forward voltage drop, with moderate leakage. the glass passivation technology used has reliable operation up to 150 c junction temperature. typical applications are in input rectification and these products are designed to be used with international rectifier switches and output rectifiers which are avail- able in identical package outlines. package outline input rectifier diode lead-free ("pbf" suffix) 1 bulletin i2176 rev a 07/06 v f < 1v @ 30a i fsm = 950a v rrm = 800 to 1200v safe ir series 60eps...pbf www.irf.com
2 60eps...pbf safe ir series bulletin i2175 rev a 07/06 www.irf.com t j max. junction temperature range - 40 to 150 c t stg max. storage temperature range - 40 to 150 c r thjc max. thermal resistance junction 0.35 c/w dc operation to case r thja max. thermal resistance junction 40 c/w to ambient r thcs typical thermal resistance, case to 0.2 c/w mounting surface , smooth and greased heatsink wt approximate weight 6 (0.21) g (oz.) t mounting torque min. 6 (5) max. 12 (10) case style to-247ac jedec (modified) thermal-mechanical specifications parameters 60eps.. units conditions kg-cm (ibf-in) voltage ratings part number v rrm , maximum v rsm , maximum non repetitive i rrm peak reverse voltage peak reverse voltage 150c vvma 60eps10pbf 1000 1100 1 60eps12pbf 1200 1300 1 v fm max. forward voltage drop 1.09 v @ 60a, t j = 25c r t forward slope resistance 3.96 m v f(to) threshold voltage 0.74 v i rm max. reverse leakage current 0.1 t j = 25 c 1.0 t j = 150 c electrical specifications parameters 60eps.. units conditions t j = 150c v r = rated v rrm ma i f(av) max. average forward current 60 a @ t c = 118 c, 180 conduction half sine wave i fsm max. peak one cycle non-repetitive 950 10ms sine pulse, rated v rrm applied surge current 1100 10ms sine pulse, no voltage reapplied i 2 t max. i 2 t for fusing 4512 10ms sine pulse, rated v rrm applied 6300 10ms sine pulse, no voltage reapplied i 2 t max. i 2 t for fusing 63000 a 2 s t = 0.1 to 10ms, no voltage reapplied absolute maximum ratings parameters 60eps.. units conditions a a 2 s
3 60eps...pbf safe ir series bulletin i2122 rev a 07/06 www.irf.com fig. 1 - current rating characteristics fig. 2 - current rating characteristics fig. 4 - forward power loss characteristics fig. 3 - forward power loss characteristics 100 110 120 130 140 150 0 10203040506070 30 60 90 120 180 ma xi mu m al lo wab le case tempera tur e (c) conduction angle average forward current (a) 60eps.. series r (dc) = 0.35 k/w thjc 110 120 130 140 150 0 20 40 60 80 100 dc 30 60 90 120 180 maximum allowable case temperature (c) conduction period average forward current (a) 60eps.. series r (dc) = 0.35 k/w thjc 0 10 20 30 40 50 60 70 80 90 100 110 0 20406080100 dc 180 120 90 60 30 rms limit conduction period average forward current (a) maximum average forward power loss (w) 60eps.. series t = 150c j 0 10 20 30 40 50 60 70 80 90 0 10203040506070 rms limit 180 120 90 60 30 conduction angle average forward current (a) maximum average forward power loss (w) 60eps.. series t = 150c j fig. 5 - maximum non-repetitive surge current fig. 6 - maximum non-repetitive surge current 300 400 500 600 700 800 900 1000 1 10 100 number of equal amplitude half cycle current pulses (n) peak half sine wave forward current (a) initial t = 150c @ 60 hz 0.0083 s @ 50 hz 0.0100 s j 60eps.. series at any rated load condition and with rated v applied following surge. rrm 200 400 600 800 1000 1200 0.01 0.1 1 pulse train duration (s) peak half sine wave forward current (a) versus pulse train duration. initial t = 150c no voltage reappli ed rated v reapplied rrm j maximum non repetitive surge current 60eps.. series
4 60eps...pbf safe ir series bulletin i2175 rev a 07/06 www.irf.com fig. 8 - thermal impedance z thjc characteristics 0.01 0.1 1 0.0001 0.001 0.01 0.1 1 10 square wave pulse duration (s) steady state value (dc operation) 60eps.. series single pulse d = 0.50 d = 0.33 d = 0.25 d = 0.17 d = 0.08 transient thermal impedance z (k/w) thjc fig. 7 - forward voltage drop characteristics 1 10 100 1000 00.511.522.533.544.5 t = 25c j instantaneous forward current (a) instantaneous forward voltage (v) 60eps.. series t = 150c j
5 60eps...pbf safe ir series bulletin i2122 rev a 07/06 www.irf.com outline table dimensions in millimeters and inches 15 .90 (0 .626) 15 .30 (0 .602) 14 .20 (0.559 ) 14. 80 ( 0.583) 3. 70 (0.14 5) 4. 30 (0 .17 0) 5.30 ( 0.208) 5. 70 (0.225) 5.50 ( 0.217) 4.50 (0.177) (2 plcs.) 3. 55 (0.13 9) 3. 65 (0 .14 4) 2.20 (0.087) max. 1.00 (0.039) 1.40 (0.056) 0. 40 (0.213) 0.80 ( 0.032) 4.70 ( 0.185) 5. 30 (0 .20 9) 1.5 ( 0.059) 2.5 ( 0.098) 2. 40 (0.09 5) max. 10 .86 (0 .427 ) 10. 94 ( 0.430) 20 .30 (0 .800 ) 19 .70 (0 .775 ) 1 3 dia. 1 cathode anode 3 2 base cathode lot code assembly international rectifier example: in assembly line "h" assembled on ww 35, 2000 lot code 5657 with assembly logo part number year 0 = 2000 p = lead-free week 35 line h 56 57 date code this is a 60eps12 60eps12 p035h marking information
6 60eps...pbf safe ir series bulletin i2175 rev a 07/06 www.irf.com ordering information table 60 e p s 12 pbf device code 1 5 2 4 3 1 - current rating (60 = 60a) 2 - circuit configuration: e = single diode 3 - package: p = to-247ac (modified) 4 - type of silicon: s = standard recovery rectifier 5 - voltage code x 100 = vrrm 6 - y none = standard production y pbf = lead-free 6 ir world headquarters: 233 kansas st., el segundo, california 90245, usa tel: (310) 252-7105 tac fax: (310) 252-7309 visit us at www.irf.com for sales contact information. 07/06 data and specifications subject to change without notice. this product has been designed and qualified for industrial level and lead-free. qualification standards can be found on ir's web site. 10 = 1000v 12 = 1200v
|